Details
RGB Remote Control 2A (28x Button Remote)
This RGB remote controller has the 28x button remote, allowing you to control each color individually (great for custom colors or low level dimming). It is a great remote for inexpensive simple color control of our RGB flexible LED strip.
~~Can control up to 32' of our 12V RGB flex strip (2A/Ch 24W)
~~Power input: 12V DC via a barrel plug 5.5mm x 2.1mm (our power supplies/transformers plug right into this controller)~~8x steps of dimming control or full 0-100% dimming in the custom mode.
~~Can be used with amplifiers to control more than 2x rolls (5m each) of RGB flex strip.
To watch a basic video of our 2A 24 key controller Click Here (This is the same except this also has individual control of each color).
Please visit our How To Install section for instructions on connecting to or from this controller or any of our other products.
Additional Information
| Suggested Uses | This controller has the 28x button remote, allowing you to control each color individually. This is great for custom colors or low level dimming. |
|---|---|
| Product Highlights | No |
| Led Color | RGB |
| Length Of Strip | No |
| Cuttable Every | No |
| # of LEDs / Meter | No |
| # of LEDs / Reel | No |
| Type of LED | No |
| Viewing Angle (Degrees) | No |
| Mounting Options | Other |
| Waterproof Rating | No |
| Voltage | 12v |
| Wattage | 24 |
| Power Usage in Off or Standby State | less than 1w |
| Power Usage Watts / Foot: Rated (Actual) | No |
| Power Usage in Amps: Rated (Actual) | No |
| Usage in Amps: Rated (Actual) Red, Blue, Green, White | No |
| Power Rating Max Amps | No |
| Power Rating Max Watts | 72 Watts |
| Output Power | No |
| Number Of Chanels | 3 |
| Rated Amps / Ch | 2A/Ch |
| Recommended Power Supply Size | 1-6A (12-72 Watt) |
| Connections Input/Output | Input: Barrel Plug 12V DC (our power supplies plug into this port) or use our Female Barrel Plug for connecting to 12v DC Car, Truck, Motorcycle, Boat or Batteries IR Receiver: The receiver is on a cord so it can be placed in view even if the receiver is behind doors Output: Has 4-Pin jack for connecting to our RGB Flex Strips (you can solder our 4-Pin connector to the strip and plug in this remote)
Note: Ensure short circuit can not occur between connecting wire before you turn on the power |
| Power Input: Connection Type, Voltage, Amperage | Barrel Plug 12V DC |
| Output Connection Type | No |
| Can Power/Control (xx) Feet of strip | No |
| Max Connected Strip Length From Each Power Connection | No |
| Controllable By | IR Infrared Remote (like a TV remote it does not go threw walls) |
| RF Frequency | No |
| Number Of Control Modes | 28 Buttons |
| Mode/Button Decription | No |
| Manual | No |
| Steps of Speed Adjustment | No |
| Dimmable Range / Steps | 8x steps of dimming control in normal mode and full 0-100% in DIY mode |
| Wire Color Code Chart | No |
| Strip Backing Color | No |
| Lumens | No |
| Weight / Item | No |
| Product Size (L)x(W)x(H) | No |
| Strip Width | No |
| Strip Thickness | No |
| Not A Stocked Item (Special Order Time) | No |
| Comes With | Remote Control and Receiver |
| Suggested Accessories | No |
| Available Options (may not be in stock) | No |
| Available Options | can get in 6/12/24v |
| Warranty | No |
Check items to add to the cart or select all
-
RGB Amplifier 5A/Ch Metal (Thin)
Regular Price:
Sale Price
-
RGB Amplifier 4A/Ch Waterproof
Regular Price:
Sale Price
-
Regular Price:
Sale Price
-
Regular Price:
Sale Price
-
12v RGB Flexible LED Strip 16' Roll (IP-65) (5060 30/M 150/Roll)
Regular Price:
Sale Price
