Welcome To usLEDsupply!

Solder-less Single Color Splice Connector Strip-Screw Terminal

Be the first to review this product

Availability: In stock

Regular Price: $5.00

Sale Price $2.40

 

OR

Quick Overview

Strip-Screw Terminal SKU# RAZ-8MM-EZ

Solder-less Single Color Splice Connector Strip-Screw Terminal SKU# RAZ-8MM-EZ

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Solder-less Single Color Splice Connector Strip-Screw Terminal SKU# RAZ-8MM-EZ
  • Solder-less Single Color Splice Connector Strip-Screw Terminal SKU# RAZ-8MM-EZ
  • Solder-less Single Color Splice Connector Strip-Screw Terminal SKU# RAZ-8MM-EZ
  • Solder-less Single Color Splice Connector Strip-Screw Terminal SKU# RAZ-8MM-EZ

Details

Solder-less Single Color Splice Connector (Strip-Screw Terminal)
~~This connector is great for easily making a solder-less connection to our single color flexible LED Strips.
~~While soldering makes a better, more permanent connection, these are easy to use and are removable and reusable.

 

It doesn't get much easier than this,
Just cut the strip to the desired length at one of the cut joints and peal off any coating (if they are IP-65 or IP-68)
then insert the strip into the end with the wide slot (if you are using the 5050 size strips you may need to trim the width of the strip down a bit on both sides so it will fit) and tighten the 2 screws
then strip and insert your wires into the other end and tighten the screws and you are done
 

 

Additional Information

Suggested Uses

 

Easy to use Splice Connector For connecting to our Flex Strips after cutting.

For our waterproof strips remove 1/4" on the coating with your finger nail then trim the strip so that the contacts are exposed on the end

 

Product Highlights

This is a great new Secure Connector.

Use this connector on any 8-10mm LED Light Strips. (10mm requires clipping the corners)
Use to connect wire directly to your strip, eliminating wire nuts and splice connectors. Can be used
to connect around corners or in parallel runs. Allows you to customize the jumper wire length to fit your need.

For use with 0.31" (8mm) wide ribbon products. Indoor / dry location use only.

Led Color Multiple
Length Of Strip No
Cuttable Every No
# of LEDs / Meter No
# of LEDs / Reel No
Type of LED No
Viewing Angle (Degrees) No
Mounting Options Other
Waterproof Rating No
Voltage 12/24v
Wattage n/a
Power Usage in Off or Standby State No
Power Usage Watts / Foot: Rated (Actual) No
Power Usage in Amps: Rated (Actual) No
Usage in Amps: Rated (Actual) Red, Blue, Green, White No
Power Rating Max Amps No
Power Rating Max Watts No
Output Power No
Number Of Chanels No
Rated Amps / Ch No
Recommended Power Supply Size No
Connections Input/Output

Just align your

Black wire with the (+) on strip
Red wire with the (-) on strip

Power Input: Connection Type, Voltage, Amperage No
Output Connection Type No
Can Power/Control (xx) Feet of strip No
Max Connected Strip Length From Each Power Connection No
Controllable By No
RF Frequency No
Number Of Control Modes No
Mode/Button Decription No
Manual No
Steps of Speed Adjustment No
Dimmable Range / Steps No
Wire Color Code Chart No
Strip Backing Color No
Lumens No
Weight / Item No
Product Size (L)x(W)x(H) (L) .5" x (W) .375" x (H) .375" in
Strip Width No
Strip Thickness No
Not A Stocked Item (Special Order Time) No
Comes With No
Suggested Accessories No
Available Options (may not be in stock) No
Available Options No
Warranty No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.